2 ) Take the bottom base piece of glass, place it on a flat, non-abrasive surface, then firmly press and stick 8 pieces of the duct tape (2 pieces on each side) to the glass from the bottom side with the sticky sides up (See Diagram View 1).
- Tip: This is easily done by lifting up the glass from each side just enough to stick the tape pieces in place.
3 ) Following the how to properly install the glass panes information from the previous page, and using our silicone application tips, install the front glass piece (See Diagram View 2). Once the front glass is in place, fold the 2 bottom pieces of duct tape upward and stick them to the front of the glass.
- Tip: This step is much easier to do with an assistant to hold the front glass pane upright and in place while you complete installation of the first side piece in the next step.
4 ) Using the same installation method, install the first side panel (See Diagram View 3), fold the 2 bottom pieces of duct tape upward and stick them to the front of the glass, and secure the side piece to the front piece of glass by wrapping 2 additional strips of duct tape around the corner from one side to the other (See Diagram Right End View Example.
